Filter
Top Products
Using the FM tuner
15
Setting up the FM tuner
For many users the only change they will want to make to the
standard operation of the 504 Stereo FM Tuner is to define the
preset stations.
However, the 504 Stereo FM Tuner contains several
customisable features that you can programme to suit your
requirements.
To set up the FM tuner options
● Turn off the FM tuner, using the power switch on the back
panel.
● Turn on the power again while holding down the Mono key on
the front panel.
The display will show:
Setup
It will then show the first setup option:
Max? 3O
● Press Mono to move between the options.
● Press A (Up) or V (Down) to change the value of the current
option.
The following table shows the options you can set up.
Option Initial value
Maximum number of
presets (1 to 30).
Max? 3O
Tuning method
(Seektune or Steptune).
Seektune
Stop strength (1 to 8).
Stop= 4
Tuning meter (Y or N).
Meter? Y
For more information about the tuning method and stop strength
see Tuning manually, page 10.
For more information about the tuning meter see To use the
tuning meter, opposite.