Filter
Top Products
25
General notes
In the case of mass storage devices with
built-in batteries, there can be function re-
strictions when the battery is completely
discharged.
Activating the mass storage device
1. Switch on the audio system and call up
the base menu "Disc". (Please refer to
the audio system operating instruc-
tions.)
2. With the CD menu active, first switch
to the AUX menu.
The last selected audio source is acti-
vated.
3. If necessary, change the audio source:
Select USB.
The folder structure of the connected
mass storage device is displayed.
4. Select the file folder.
The stored audio file of the selected
folder are displayed in alphabetical
order.
5. Select an mp3 file from the list.
Playback starts. The play mode ap-
pears in the display.
Operation
Operation and the play mode are the same
as those on the iPod
®
. (See page 21.)
GRisk of accident
Only connect the mass storage device
when
the vehicle is at a standstill. Otherwise, there
is a risk that you could be distracted from
traffic conditions and cause an accident.
Note
Playback is restricted to mp3 files.
Note
Up to 1000 audio files per file folder are
displayed.
Note
If the mass storage device is disconnec-
ted from the Universal Media Interface
during playback or playback is interrup-
ted by switching to another audio sour-
ce, the current playback position of the
selected mp3 file is stored in the Univer-
sal Media Interface. The next time the
mass storage device (with unchanged
content) is selected or the system is
switched to USB, playback of the last
selected mp3 file is continued automati-
cally.
USB (mp3 player)
MBA_BA_book.book Seite 25 Mittwoch, 2. September 2009 1:30 13