Filter
Top Products
20
Activating the iPod
®
1. Switch on the audio system and call up
the base menu "Disc". (Please refer to
the audio system operating instruc-
tions.)
2. With the CD menu active, first switch
to the AUX menu.
The last selected audio source is acti-
vated.
3. If necessary, change the audio source:
Select iPod.
The iPod
®
is activated by the opera-
ting system and continues to perform
the function which was selected befo-
re being connected.
Adjusting the volume
The volume can be adjusted using the
thumbwheel on the Audio 20. (Please refer
to the audio system operating instruc-
tions.)
Operating the iPod
®
Once the iPod
®
is connected, the "click
wheel" on the iPod
®
will not be active.
Disc
iPod
Sound
Aux
USB
Audio streaming
M+P-03F-7145
Note
If the message Error appears in the dis-
play, the iPod
®
must be reset (reset
function). Please refer to the separate
iPod
®
User's Guide for more detailed in-
formation.
Note
Any voice announcements while route
guidance is active will not interrupt play-
back of the audio files.
GRisk of accident
Only use the iPod
®
when traffic conditions al-
low you to do so. You could otherwise be dis-
tracted from traffic and cause an accident in
which you and/or others could be injured.
Do not wear headphones while driving the
car; otherwise you may not be able to hear
what is going on around you.
iPod
®
MBA_BA_book.book Seite 20 Mittwoch, 2. September 2009 1:30 13