Filter
Top Products
14
To repeat a single track, while in
the Stop mode, press the
P-MODE/MEMO. Up button ❶
once; “REPEAT” will blink in the
display. Press the Tune/Skip/
Time Down (-) 2 or Up (+) 3
button to select the specific track
that you wish to repeat. While the
desired track number is blinking in
the display, press the
PLAY/PAUSE (®p) button ❹ to
begin playback. The specific track
you selected will be repeated
continuously.
1
2
3
4
1
To cancel Repeat Playback,
press the P-MODE/MEMO. Up
button repeatedly until the mode
indicators disappear from the
display.
3
To repeat all of the tracks on a
disc continuously, while in the
Stop mode, press the
P-MODE/MEMO. Up button ❶
twice; “REPEAT” will light solid in
the display. Press the PLAY/
PAUSE (®p) button ❷ to begin
all tracks repeating.
1
2
2
REPEAT PLAYBACK OF ONE TRACK OR ALL TRACKS
Repeatedly press the FUNCTION
button to select CD.
1
1
Press the PROG./MEMO./Clock
Set button; “P01” (program
number) will appear, "MEMORY"
will blink and then “00” (track
number) will blink in the display.
3
Press the CD OPEN button and
gently press a CD onto the center
spindle with the label side facing
forward and close the CD
compartment.
NOTE: 3 inch single or standard
CDs can be used with this unit.
2
PROGRAMMED PLAYBACK
The CD player in this unit has a 20 track programmable memory that allows you to program up to 20 tracks
on any disc for playback in any desired order. You may program 20 different tracks or you may also program
certain tracks to play more than once.
To perform programmed playback, proceed as follows:
PROGRAMMED PLAYBACK SECTION CONTINUED ON NEXT PAGE
OPERATING INSTRUCTIONS (CONTINUED)