Filter
Top Products
OPERATING THIS TV SET
Choice of antenna and connection
Connect the antenna to RF input terminal (Refer to the diagram below)
Antenna
~
~ 1.Q.='~_~~ooo9
300-750 adaptor
300-75Q adaptor
To get best picture and sound, a correct antenna (75,0, -axial cable) and a
correct terminal are needed. If a community antenna system is used, a correct
cable and jack is needed to connect the antenna and the TV set. Your local
community antenna dealer can help you to get the correct antenna system and
needed assisories.
If a TV Ext. Antenna Input Jack is used, you should connect a 300-75,0,
adaptor to the flat cable of the indoor antenna and then plug it into the RF input
terminal.
If there is no community antenna system or signal is weak. A set of outdoor
antenna and a signal booster is requested. If VHF antenna and flat cable are
used, then 300-75,0, adaptor is needed which is connected to the flat cable and
then inserted into RF input terminal. If UHF antenna is used, a 75,0, co-axial
cable and antenna jack are needed to connect to the TV set.
Note: (1) The outdoor antenna should be located in high position away from
electrical wires or neon.
(2) In areas with weak signal, if an outdoor antenna cannot get ideal picture
and sound, please consider to use a signal booster.
(3) During thundering and lighting, the outdoor antenna and power should be
unpluged to ensure safety.
E.8