9
CD PLAYBACK NOTES:
• See page 16 for more information on MP3’s.
• When recording (“burning”) CDs, make sure the session is “finalized”, or simply
record “burn” only one session. You can find more information in your recorder’s
manual.
• This unit is capable of playing standard CDs or 3” singles; no adapter is
required.
• If a disc is inserted incorrectly, dirty, damaged or not present at all, “No Disc”
will appear in the display.
• If a disc is not recorded properly, a disc error will occur and “Invalid Disc” will
appear in the display.
• Playback will stop when you open the CD compartment, but it is not
recommended to open the compartment before the STOP (
■)/POWER OFF
button is pressed.
• If there is no activity for 60 seconds, the unit will turn itself off to save the batteries.
• It may take 10 to 30 seconds for the player to read an MP3 CD and begin
playback, depending on the number of tracks burned on the CD.
CD OPERATION (CONTINUED)
During CD playback, if you wish to
pause the disc momentarily, press the
PLAY/PAUSE (
®p)/POWER ON but-
ton. Playback stops but the disc con-
tinues to spin, the elapsed time will
blink and “PAUSE” will appear in the
display.
1
Press the PLAY/PAUSE (®p)
/POWER ON button again to release
pause and resume playback. The
sound returns, “PAUSE” will disappear
and the elapsed time in the display
stops flashing.
2
TO PAUSE A CD