Memorex MP3228 CD Player User Manual


 
This unit is designed to operate on AC household current or DC (batteries).
AC
Use the AC polarized line cord included with the unit
for operation on AC power. Insert one end of the AC
line cord into the AC power jack on the rear of the unit
and the other end (with the 2 blades) into a conve-
niently located AC outlet having 120V, 60Hz. When
the AC cord is plugged in, the batteries will be disconnected.
NOTE: The AC plug supplied with the unit is polarized to help minimize the possi-
bility of electric shock. If the AC plug does not fit into a nonpolarized AC outlet, do
not file or cut the wide blade. It is the user’s responsibility to have an electrician
replace the obsolete outlet.
BATTERY INSTALLATION
To use this unit with battery power, remove the
battery door on the bottom of the unit by sliding
the battery door off. Insert eight (8) ‘C’ size
batteries following the diagram in the
compartment.
NOTE: The AC power cord must be disconnect-
ed from the AC power jack on the rear of the unit
in order for the unit to operate on battery power.
POWER SOURCES
7
AC Plug
AC Outlet
+
+
-
-
+
+
-
-
+
+
-
-
+
+
-
-
BATTERY PRECAUTIONS
Follow these precautions when using batteries in this device:
1. Use only the size and type of batteries specified.
2. Be sure to follow the correct polarity when installing the batteries as indicated in the battery compartment.
Reversed batteries may cause damage to the device.
3. Do not mix different types of batteries together (e.g. Alkaline, Rechargeable and Carbon-zinc) or old batteries
with fresh ones.
4. If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury from
possible battery leakage.
5. Do not try to recharge batteries not intended to be recharged; they can overheat and rupture. (Follow battery
manufacturer’s directions.)
HEADPHONE JACK (REAR OF UNIT)
For private listening, connect 3.5mm (32 ohm) stereo headphones (not included) to this
jack. The speakers are automatically disconnected when the headphone plug is inserted in
the jack.
BACKLIGHT
When the unit is on, the backlight in the display will light.