Filter
Top Products
OPERATION (CONTINUED)
14
NOTES ON PROGRAMMED PLAY:
• Programming is the ability to preselect the order in which a series of tracks
will be played.
• Each track may be stored in the program memory as many times as desired.
• As each track is played, its track number will be displayed. You can move for-
ward or backward through the programmed tracks with the
Tune/Skip/Search o or n button.
• The CD player will stop after all programmed tracks have been played or the
STOP (■) button is pressed.
• To stop Program playback, press the STOP (■) button. To play back the pro-
gram again, press the PROG/MEM/CLOCK SET button followed by the
PLAY/PAUSE (/p) button.
• To clear the program memories, while in the Stop mode, press the
PROG/MEM/CLOCK SET button followed by the STOP (■) button.
It is also possible to use the Program and
Repeat functions together to repeat a
specific program indefinitely. First,
program the tracks you wish to hear in the
order you wish to hear them, as described
on page 13. Then, press the MODE/M-
UP button twice. Both the “MEM” and
Repeat indicators will light.
3
2
1
2
1
Press the PLAY/PAUSE (/p) button
to begin programmed repeat
playback. The player will play the
tracks you selected in the order in
which you programmed them. When
the last track in the program has been
played, the entire program will begin
again.
2
1
3
1
2
PROGRAMMED REPEAT
NOTE:
Program Repeat operation will continue indefinitely until you press the STOP (■)
button.