Filter
Top Products
16
TIMER SETTING
3. Press the MEMO / C-ADJ button again and minute digit
will flash. Then press the TUNING • DOWN / PREVI-
OUS or TUNING • UP / NEXT button until the correct
minute digit appears.
TIME OFF SETTING
1. Press the MODE / REMAIN button until the Time OFF
appears.
2. Press the MEMO / C-ADJ button one time and hour
digit will flash. Then press the TUNING • DOWN /
PREVIOUS or TUNING • UP / NEXT button until the
correct hour digit appears.
NOTE: Make sure TIMER appears in the top left corner.
If TIMER dose not appear on LCD display, press
TIMER button on remote control and follow steps
above to set.To cancel TIMER ON/OFF setting,
press TIMER button on remote control again until
the TIMER disappears from LCD display.
Your system can automatically turn itself off after 10 to 90
minutes. Choose the period that you wish system to stay
on, and when the “SLEEP” time arrives, the system will
turn itself off automatically.
1. Turn the system on and press SLEEP button. The
“SLEEP” indicator will illuminate.
2. Press the SLEEP button continuously to set the sleep
time from 90 to 10.
4. Press the TIMER button until the appears, then
press the POWER button to turn the system to
STANDBY mode.
NOTE: Make sure the is displayed. The system will
automatically turn on/off itself when set time arrives.
SLEEP TIMER
3. Press the MEMO / C-ADJ button again and minute digit
will flash. Then press the TUNING • DOWN / PREVI-
OUS or TUNING • UP / NEXT button until the correct
minute digit appears.
2. Press the MEMO / C-ADJ button one time and hour
digit will flash. Then press the TUNING • DOWN /
PREVIOUS or TUNING • UP / NEXT button until the
correct hour digit appears.