Filter
Top Products
15
Press the Tune/Skip/Search o 1
or n 2 button to select the first
track that you wish to program.
When the desired track number
appears in the display, press the
MEM/CLOCK ADJ button 3 again.
2
1
3
4
Press either the Tune/Skip/Search
o 1 or n 2 button to select the
next track you wish to program.
When the desired track number
appears in the display, press the
MEM/CLOCK ADJ button
3 again.
2
1
3
5
Repeat step 5 until you have
programmed up to 20 track
numbers into the CD Program
Memory. When the memory is
full, it will cycle back to track 1.
2
1
3
6
After programming up to 20 tracks in the CD Program Memory, press the
PLAY/PAUSE (
®p) button 1 to begin programmed playback. “MEM” will appear in
the display and playback will begin on the first track that you programmed. (
NOTE:
If you wait more than approx. 5 seconds, the unit will exit Program mode; in that
case, press the MEM/CLOCK ADJ button
2 followed by the PLAY/PAUSE (®p)
button
1 to begin programmed playback.) The player will continue to play all of the
tracks that you programmed in the order in which you programmed them. When the
last programmed track has been played, the player will stop and the display will
again show the total number of tracks/playing time on the disc. If you press the
MEM/CLOCK ADJ button
❷ and then press the PLAY/PAUSE (®p) button 1
again, playback will start on the first track you programmed and will continue until all
the programmed tracks have been played. To cancel the Programmed memories,
while in the Stop mode, press the MEM/CLOCK ADJ button
2 to enter the program
mode, and then press the STOP/BAND (
■) button 3 .
2
1
3
7
It is also possible to use the
Program and Repeat functions
together to repeat a specific
program indefinitely. First, press
the REPEAT/MEM-UP button twice
to enter the Repeat All mode and
then program the tracks you wish
to hear in the order you wish to
hear them, as described above.
1
Press the PLAY/PAUSE (®p)
button to begin programmed
repeat playback.
Both the MEM
and REP indicators will appear in
the display. The player will play
the tracks you selected in the
order in which you programmed
them. When the last track in the
program has been played, the
entire program will begin again.
2
2
Programmed Repeat operation
will continue indefinitely until you
press the
STOP/BAND (
■)
button.
2
3
PROGRAMMED REPEAT
OPERATING INSTRUCTIONS (CONTINUED)
NOTE: To check the programmed tracks, while in the Stop mode, press the MEM/CLOCK ADJ button
repeatedly to view the programmed tracks.