Filter
Top Products
12
Press the Tune/Skip/Search n 1
or o 2 button to select the first
track that you wish to program.
When the desired track number
appears in the display, press the
MEM/CLOCK SET button
3 again.
1
2
3
4
Press either the Tune/Skip/Search
n 1 or o 2 button to select the
next track you wish to program.
When the desired track number
appears in the display, press the
MEM/CLOCK SET button
3 again.
1
2
3
5
Repeat step 5 until you have
programmed up to 32 track
numbers into the CD Program
Memory. When the memory is
full, “FULL” will appear in the
display for one second.
1
2
3
6
After programming up to 32 tracks in the CD Program Memory, press
the PLAY/PAUSE (®p) button 1 to begin programmed playback.
“MEMORY” will appear in the display and playback will begin on the
first track that you programmed. The player will continue to play all of
the tracks that you programmed in the order in which you programmed
them. When the last programmed track has been played, the player will
stop and the display will again show the total number of tracks/playing
time on the disc. If you press the MEM/CLOCK SET button ❷ and then
press the PLAY/PAUSE (®p) button 1 again, playback will start on the
first track you programmed and will continue until all the programmed
tracks have been played. To cancel the Programmed Playback mode,
while in the Stop mode, press the MEM/CLOCK SET button 2 to enter
the program mode, and then press the STOP/BAND (■) button 3 .
2
1
3
7
It is also possible to use the
Program and Repeat functions
together to repeat a specific
program indefinitely. First, press
the REPEAT/MEM-UP button twice
to enter the Repeat-All mode and
then program the tracks you wish
to hear in the order you wish to
hear them, as described above.
Both the MEMORY and REPEAT
indicators will appear in the display.
1
Press the PLAY/PAUSE (®p)
button to begin programmed
repeat playback. The player will
play the tracks you selected in the
order in which you programmed
them. When the last track in the
program has been played, the
entire program will begin again.
2
Programmed Repeat operation
will continue indefinitely until you
press the STOP/BAND (■)
button.
3
PROGRAMMED REPEAT
OPERATING INSTRUCTIONS (CONTINUED)
NOTE: To check the programmed tracks, while in the Stop mode, press the MEM/CLOCK SET button
repeatedly to view the programmed tracks.