Filter
Top Products
19
Slide the VIDEO OUT switch ❶ to
the CAMERA position to see the
camera’s image on the external
TV. Slide the MONITOR switch ❷
to the CAMERA position to see
the camera’s image on the
monitor.
2
1
1
ADJUSTING FOCUS: Rotate the
ring located on the outside of the
camera lens to adjust the
camera’s focus.
3
Lift open the camera
compartment and remove the
protective cover on the camera
lens. The camera will then show
the image on the monitor and/or
the external TV screen.
Rotate the camera as desired.
2
USING THE BUILT-IN CAMERA
OPERATION (CONTINUED)
V-HOLD CONTRAST BRIGHTNESS
If the picture moves up and down
or rolls, rotate to adjust the
vertical hold.
If the picture is too strong or too
weak, rotate to adjust the contrast
and clearly define the shades of
blacks, grays and whites.
If the picture is too light or too
dark, rotate to adjust the
brightness.
ADJUSTING THE PICTURE
When watching a CD+G on the monitor screen, adjust the brightness, v-hold and contrast as follows: