9
OPERATION (CONTINUED)
When the AVC feature is activated, the vocals
on a multiplex recording are muted as soon as
the singer begins singing into the microphone.
When the singer stops singing, the vocals are
automatically un-muted. Adjust AVC control for
the best balance between playback and
microphone levels.
IMPORTANT: This feature only works with
multiplex CDs and cassettes.
AUTO VOICE CONTROL
Slide the MONITOR switch to select what image will
appear on the built-in monitor:
OFF: No image on the monitor.
AUX: The video from the A/V IN jacks will appear on
the external TV.
CDG: The lyrics will appear on the monitor.
CAMERA: The camera’s image will appear on the
monitor.
MONITOR SWITCH
Slide to the CDG position when
using CDG or CDs, slide to the
TAPE position when playing
tapes or slide to the AUX
position when listening to the
unit connected to the A/V IN
jacks on the rear of the unit.
1
FUNCTION SWITCH
To turn the microphone on, slide
the ON/OFF switch, located on
the side of the microphone, to
the ON position. To turn the
microphone off, slide the
ON/OFF switch to the OFF
position.
1
MIC ON/OFF SWITCH
To output this unit’s video/audio
onto the unit connected to the
A/V OUT jacks. Slide to the
CDG position when viewing/
listening to a CDG or CDs, slide
to the AUX position when
listening to the unit connected to
the A/V IN jacks on the rear of
the unit or slide to the CAMERA
position to view the camera’s
image.
1
VIDEO OUT SWITCH