Filter
Top Products
3
INSTALLATION
Insert the belt strap into the belt clip,
then fold the belt strap and fasten the
velcro.
1
Insert the belt clip into the main unit,
then push the belt clip until it locks in
place at the end of the belt clip holder.
2
Straighten the other side of the belt,
then put the belt around your arm (it
will rope your arm itself). Fasten the
velcro so the unit is secure.
3
TO REMOVE THE BELT CLIP:
Press and hold the Belt Clip release
button, then push the belt clip out to
remove it from the unit.
4
TO USE THE ARM STRAP
EARBUDS:
Included with this unit are earbuds. Make sure the VOLUME control is at
minimum and insert the earbud plug into the earbud jack on the top of the
unit. Place the earbuds into your left and right ears, corresponding to the
“L” and “R” mark on each earbud.
NOTE: You must have the earbuds plugged in to hear the alarm sound.
MB211.O/M.QXD 7/22/03 1:49 PM Page 3