Filter
Top Products
2
Thank You......................................................................... 2
Please Take a Moment ...................................................... 2
Technical Assistance......................................................... 2
Customer Service.............................................................. 2
Table of Contents.............................................................. 2
Safety Instructions ............................................................ 3
Introduction ...................................................................... 4
Performance Features ....................................................... 4
Installation ........................................................................ 5
Rear Panel Controls and Connections .............................. 6
How to Connect ................................................................ 7
Front Panel Displays and Controls ................................... 8
How to Operate................................................................. 9
Specifications ................................................................. 10
Packing Instruction ......................................................... 11
NOTES:
1. The following Connecting Cable is available from the
McIntosh Parts Department:
Data and Power Control Cable Part No. 170-202
Six foot, shielded 2 conductor, with 1/8 inch stereo mini
phone plugs on each end.
2. For additional connection information, refer to the owners
manual(s) for any component(s) connected to the MC352
Amplifier.
3. There is a built-in turn on delay which will mute the speaker
outputs for approximately two seconds when the amplifier is
turned on.
4. It is very important that loudspeaker cables of adequate size
be used in your music system, to ensure that there will be no
power loss or heating. Cable size is specified in Gauge
numbers or AWG, (American Wire Gauge). The smaller the
Gauge number, the larger the wire size:
If your loudspeaker cables are 25 feet (7.62m) or less,
use at least 16 Gauge (AWG) wire size or larger.
If your loudspeaker cables are 50 feet (38.1m) or less,
use at least 14 Gauge (AWG) wire size or larger.
If your loudspeaker cables are 100 feet (76.2m) or less,
use at least 12 Gauge (AWG) wire size or larger.
5. Pin configuration for the XLR Balanced Input connectors on
the MC352: PIN 1: Shield or ground.
PIN 2: + input.
PIN 3: - input.
6. In the event that MC352 Power Amplifier over heats, due to
improper ventilation and/or extremely high ambient
temperature, the built in protection circuits will activate. The
MC352 Front Panel Power Guard LEDs will both
continuously indicate On and the audio input signal will be
muted. When the temperature of the MC352 has returned to
a safe condition, sound will return and the Power Guard
Indictors will return to normal operation.
Thank You, Please Take A Moment,
Customer Service and Table of Contents
Table of ContentsThank You
Technical Assistance
Customer Service
Copyright 1998 by McIntosh Laboratory, Inc.
Please Take A Moment
The serial number, purchase date and McIntosh dealer
name are important to you for possible insurance claim or
future service. The spaces below have been provided for
you to record that information:
Your decision to own this McIntosh MC352 Power Ampli-
fier ranks you at the very top among discriminating music
listeners. You now have The Best. The McIntosh dedica-
tion to Quality, is assurance that you will receive many
years of musical enjoyment from this unit.
Please take a short time to read the information in this
manual. We want you to be as familiar as possible with all
the features and functions of your new McIntosh.
Serial Number:
Purchase Date:
Dealer Name:
If at any time you have questions about your McIntosh
product, contact your McIntosh dealer who is familiar with
your McIntosh equipment and any other brands that may
be part of your system. If you or your dealer wish addi-
tional help concerning a suspected problem, you can re-
ceive technical assistance for all McIntosh products at:
McIntosh Sales Corporation
661 W. Redondo Beach Blvd.
Gardena, CA 90247
Phone: 888-979-3737
Fax: 310-217-9288
If it is determined that your McIntosh product is in need of
repair, you can return it to your dealer. You can also return
it to the McIntosh Laboratory Service Repair department.
For assistance on factory repair return procedure, contact
the McIntosh Repair Department at:
McIntosh Laboratory, Inc.
2 Chambers Street
Binghamton, New York 13903
Phone: 607-723-3515
Fax: 607-723-1917