Filter
Top Products
9
Studiophile BX8a
English
Appendix A - Technical Specifications
Type:
2-way near-field studio reference monitors
LF Driver:
8-inch Kevlar curved cone with high temperature voice coil and damped
rubber surround.
HF Driver:
1-inch magnetically shielded natural silk dome
Frequency Response:
40Hz - 22kHz
Crossover Frequency:
2.2kHz
LF Amplifier Power:
70W
HF Amplifier Power:
60W
Maximum S/N:
(dynamic range)
> 100dB typical A-weighted
Input Connectors:
1 x XLR balanced input connector
1 x TRS balanced/unbalanced input connector
Polarity:
positive signal at + input produce outward LF cone displacement
Input Impedance:
20k ohms balanced,10k ohms unbalanced
Input Sensitivity:
85mV pink noise input produces 90dBA output SPL at one meter with volume
control at maximum
Protection:
RF interference, output current limiting, over temperature, turn-on/off
transient, subsonic filter, external mains fuse.
Indicator:
power on/off indicator on rear panel
Power Requirements:
factory programmed for either 115V ~50/60Hz, 230V~50/60Hz
Cabinet:
vinyl-laminated MDF
Dimension:
12” (H) x 10” (W) x 15” (D)
Weight:
26.4 lbs. unit 11.97 kg
* Above specifications subject to change without notice
Your BX8a Warranty
Warranty Terms
M-Audio warrants products to be free from defects in materials and workmanship, under
normal use and provided that the product is owned by the original, registered user. Visit
www.m-audio.com/warranty for terms and limitations applying to your specific product.
Warranty Registration
Thank you for registering your new M-Audio product. Doing so immediately both entitles you to full
warranty coverage and helps M-Audio develop and manufacture the finest quality products available.
Register online at www.m-audio.com/register to receive FREE product updates and for the chance to win
FREE M-Audio gear.