Filter
Top Products
4 Introduction & Installation in Brief
IntroduCtIon & InstallatIon In BrIef
Congratulations! You have invested in one of the
world's premier subwoofers.
The MartinLogan CW10 represents the extension of
an intensive, dedicated team research program direct-
ed toward establishing a world class line of reference
subwoofers using leading-edge technology, without com-
promising durability, reliability, craftsmanship or aesthetics.
The CW10 subwoofer uses a 10-inch high-excursion driv-
er to achieve deep, tight, well-defined bass. A proprietary
amplifier is used to drive the output stage with precision
and extremely high efficiency. Low-pass filtering and
phase control have been designed to make integrating the
CW10 subwoofer with MartinLogan and non-MartinLo-
gan products both seamless and simple.
The materials in your new CW10 subwoofer are of the
highest quality and will provide years of enduring enjoy-
ment and deepening respect. The cabinet is constructed
from the finest composite material for acoustical integrity
and is finished with an attractive custom coating.
This User's Manual will explain in detail the operation of
your CW10 subwoofer and the philosophy applied to its
design. A clear understanding will insure that you obtain
maximum performance and pleasure from this most exact-
ing subwoofer.
We know that you are eager to hear your new CW10
subwoofer, so this section is provided to allow fast and
easy
set up. Once you have it operational, please take
the time to
read, in depth, the rest of the information in
this manual. It will give you perspective on how to attain
the greatest possible performance from this most exacting
subwoofer system.
If you experience any difficulties in setup or operation of
the CW10, please refer to the Placement, Room Acoustics
and Connections and Control Settings sections.
Should you encounter a persistent problem that cannot
be resolved, please contact your authorized MartinLogan
dealer. They will provide you with the appropriate technical
analysis to alleviate the situation.
Step1:Unpacking
Remove your new subwoofer from its packing.
Step2:Placement
Ideally, place the CW10 in a corner near the front of
the room. This is a good place to start. Please see the
Placement section (page 9) of this manual for more details.
Step3:SignalConnection
Use the best cables you can. High quality cables, available
from your specialty dealer, are recommended and will
give you superior performance.
Attach your preamplifier/processor outputs through cables
to the signal input area located on the CW10’s rear
panel. Please see the Connections and Control Settings
section (pages 6–8) of this manual for more details.
Step4:PowerConnection(AC)(seewarning)
Make sure the level knob is set at 'Min'. Plug the CW10
subwoofer into a wall outlet. Review the AC Power
Connection section (page 8) of this manual for more details.
Step5:SettingtheControls
Set the level knob to a medium volume position (12 o'clock).
Set the power switch to ‘Auto On'.
Step6:ListenandEnjoy
Now, you may adjust your system and enjoy!
Introduction Installation in Brief