Filter
Top Products
• Connect the phase, neutralize and load wire to the terminals of
the MicroModule AWM2.
• Connect the thin wires of the built-in module to the wall switch.
Connect the blue wire to clamp P of the wall switch.
• Position the MicroModule against the back wall of the wall outlet
behind all the wires.
• You are now able to program the MicroModule. For more
information see chapter "Programming".
prog.
SAIX
P
L
N
prog.
SAIX
P
L
N
6 MARMITEK
Red
Blue
Brown
Phase 230V
Load
Neutral