Filter
Top Products
Preparation
and
Connection
.:. Before making connections
Be sure to turn the power off for the ZS5300 and other products to be connected to ZS5300 before making
connections.
Please refer the instruction manuals for other products to make sure of the proper connections and terminals.
•:. Keypad
The keypads that can be connected to the unit are keypads and connecting boxes made by NILES and XANTECH
shown below. If you want to use products that are not
in
the list below or made by other manufacturers, please
contact your authorized Marantz dealer.
•
NILES
Keypad
IR
Main System unit
IR
Sensor
IR
Flasher
·XANTECH
Keypad
Connecting block
IR
Sensor
IR
Emitter
: IntelliPad
: IRP6+
:
MS2
: IRC-2
: SMARTPAD3
: 789-44
: 480-30 Series
: 282M
Note:
When connecting a Keypad, refer to the instruction manual for the Keypad as well as for this unit.
I
Connecting
speakers
There are 2 ways to connect speakers. See the
pictures below.
.:. Connecting speaker wire
1.
Strip away approx..6/8 inch (20 mm) of wire
insulation.
(ob~
~I
Approx. 6/8 inch
(20mm)
2.
Twist the bared wire ends tight to prevent short
circuits.
~~O~
+,§sssssssss~
3.
Insert the bare part of the wire into the hole
in
the
each terminal as follow.
.:. Connecting banana plug
Banana plug connections are also possible.
9