Marantz SW7001 Speaker User Manual


 
3
ENGLISH
CONNECTIONS
MODEL NO. SW7001
MODEL NO. SW7001
AC IN
AC IN
AC OUTLETS
AC OUTLETS
UNSWITCHED 350W MAX
UNSWITCHED 350W MAX
120V 60Hz
120V 60Hz
INPUT
INPUT
CONTROL IN
CONTROL IN
SUB W. PREOUT
SUB W.
CONTROL OUT
Use the connecting cables supplied with this unit when connecting with the ES7001 Home Theater System.
• If the unit is turned on after connection with the ES7001, the unit goes into standby mode or turns on in conjunction with operation of the
ES7001. (Subwoofers of other manufacturers do not work in conjunction with the ES7001.)
Notes:
Do not connect the AC power cord of the unit to the wall outlet before making all connections.
Insert all connecting cable plugs firmly into the connectors. A loose connection may result in no sound or noise.
• Be sure to unplug the unit when connecting or disconnecting the cables. Connecting or disconnecting the cables without unplugging may cause
a malfunction or breakdown of the unit.
7 Connecting the unit
Connect the INPUT jack on this unit to the SUB W. PREOUT jack on the ES7001.
Connect the CONTROL IN jack on this unit to the SUB W. CONTROL OUT jack on the ES7001.
Rear of SW7001 Right side of ES7001
INSTALLATION
Notes:
• Install the unit near the wall outlet so that
the AC power cord is easily disconnected.
• The unit is not disconnected from the AC
power source even if the unit is turned off.
To disconnect it from the AC power source
completely, unplug the unit from the wall
outlet.
7 Unit’s anti-magnetism and
interference with a TV picture
This unit is an anti-magnetic type subwoofer,
but if the unit is located near a TV, the colors
may become spotty. If this occurs, place the
unit further away from the TV.
7 Howling
When the unit is placed near an analog record
player, the output sound from the unit may
cause the installation surface and ambient air
to vibrate, producing howling. If this happens,
install the unit further away from the analog
record player or decrease the volume level of
the unit.
In rare cases, howling may occur with a VCR,
compact disc player, mini-disc player or DVD
player and result in deterioration of sound
and picture. In this case, place the unit further
away from the equipment or decrease the
volume.