Filter
Top Products
5
ENGLISH
q FM antenna terminals A/B (75 ohms)
Connect an external FM antenna with a coaxial cable, or
a cable network FM source.
w AM antenna and ground terminals
Connect the supplied AM loop antenna. Use the
terminals marked “AM” and “GND”. The supplied AM
loop antenna will provide good AM reception in most
areas. Position the loop antenna until you hear the best
reception.
e LINE OUT (analog output) connectors
The audio signals are output from these connectors.
r
REMOTE CONTROL connector
Using the supplied remote control connecting cord, this
connector enable this unit to be connected to a Marantz
component equipped with remote control connectors.
This connection make it possible to control an entire
system that centers on the amplifier or other such
component.
t RESET switch
Press this switch gently with the tip of a ballpoint pen or
similarly thin object if the tuner does not respond to a
button on the front panel. (See page 11.)
y Power cable
Connect the cable to a household power outlet (230V
AC).
PARTS NAMES AND FUNCTIONS
REAR PANEL
75Ω 75Ω
FM ANTENNA B
AM
AM ANTENNA
FM ANTENNA A
GND
RESET
REMOTE
LINE OUT
L
R
CONTROL
q w e r t y