Filter
Top Products
5
ENGLISHFRANçaISDEUTSCH
NEDERLANDS
ESPAÑOLITALIANOPORTUGUÊSSVENSKADANSK
OPERATIONS
HOW TO ADJUST CURRENT TIME
You can adjust the current time even if the system power is off.
Time adjustment (for example: 11:35)
1. Press the TIME ADJUST button. (Clock section will be shown on
the display.)
2. Set hour (11) by pressing the TUNING (▼/▲) buttons.
3. Press the NEXT button. (Minutes signal blinks on the display.)
4. Set minute (35) by pressing the TUNING (▼/▲) buttons.
5. Pressing the TIME ADJUST button or NEXT button completes the
adjustment.
HOW TO PRESET BROADCASTS
<Preparation>
Press the BAND button to select the broadcast band.
Manual Memory Presetting
1. TUNING
Select the broadcast frequency you want to memorize by pressing
the TUNING UP/DOWN button.
2. PRESET CALL
Press the MEMO button briefly (for 0.5 second or less).
Select the channel you want by pressing the PRESET UP/DOWN
button while the “MEMORY” indicator lamp is blinking.
3. MEMORY
Press the MEMO button to memorize the broadcast.
• You can preset up to 30 FM and 30 AM (MW) channels.
Automatic Memory Presetting
1. MEMORY
Press the MEMO button for long (for more than 0.5 second).
Whenever the next highest broadcast frequency is selected, the
selected broadcast is preset automatically.
2. PRESET CALL
Check the preset broadcast by pressing the PRESET UP/DOWN but-
ton.
NOTES:
• In FM Automatic Memory Presetting, frequency is automatically
memorized. The setting which has better reception will be preset first.
• If the new broadcast channel is preset to a channel, the channel which
had been preset to that position earlier will be automatically erased.
• It is impossible to preset automatically in areas far away from the broad-
cast station or in mountain areas where received signals are weak.
HOW TO MEMORIZE BROADCASTING STATION
NAME
If only a frequency is preset, fill in the station name using manual or
automatic memory presetting.
(Example) FM 98.80 MHz 3ch, Station name: BBC 1
1. Press the BAND button.
Select the FM band.
2. TUNING
Set 98.80 MHz by pressing the TUNING button.
3. ST. NAME
Press the ST. NAME button.
“---” or the station name preset last will be shown on the display.
Preset the station name, “BBC 1”.
(1) B fi B ---: after setting “B” by pressing the TUNING button
when the first signal blinks, press the NEXT button.
(2) Preset “B, B, C, 1” as in step (1) above.
4. MEMORY
Press the MEMO button briefly (0.5 second or less).
(The “MEMORY” indicator blinks.)
5. PRESET CALL
After setting “03” by pressing the PRESET UP/DOWN button, press
the MEMO button briefly once more.
• BBC1 FM 98.80 MHz 03 has been just preset.
NOTES:
• File content: A, B, C
…
X, Y, Z (alphabet)
0, 1,
…
8, 9 (number), blank
• Current time will not be displayed if the station name has already
been preset.
HOW TO USE SLEEP FUNCTION
Sleep programming is used to preset the time to turn off system power
while listening to music.
1. Press the SLEEP button.
“SLEEP 120” is shown on the front display.
2. Each press of the button changes the time indication by 10 min-
utes.
(Released condition)
fi SLEEP 120 fi SLEEP 110 fi
…
fi SLEEP 010 fi SLEEP
…
If you press the TUNING UP/DOWN button after pressing the SLEEP
button, you can adjust the time by one minute at a time.
3. Five seconds after presetting the sleep time, the system will return
to the previous status and thereafter begin sleep timing.
To cancel the SLEEP (timer), turn the power off.
NOTES:
• If you want to know the time remaining until the sleep time, press
the SLEEP button once.
• To allow the sleep function to work properly, you need to connect
the remote control terminal of the tuner to the corresponding re-
mote control terminal of the amplifier.