Filter
Top Products
9
ENGLISH
OSD MAIN MENU
1. Press the AMP button ,.
2. Press OK button ⁄0 to display the “MAIN MENU” of the on-screen
display menu.
Choose a desired item in the contents with ^ or v button, and
press the OK button to select.
Display will change to menu for each item.
SYSTEM SETUP
SYSTEM SETUP 1/3
7CH-INPUT : The 7 channel input of the SR7200 can be
selected to use a 7channel input. Select 7
channel use by < or > button.
TV AUTO : This product is equipped with a TV-auto ON/
OFF system, which automatically turns on or off
the power 1 second to 5 minutes after the TV
video input signal has been sent or has been
stopped.
Switch the TV AUTO ON/OFF function to enable
or disable with < or > button.
To use this function, connect the TV video input
to TV tuner’s video output.
NEXT SETUP/EXIT :If you desire to continue the next setup ,press
the OK button on NEXT-SETUP, if you desire to
exit from OSD menu system, press the OK
button on EXIT.
SYSTEM SETUP 2/3 (SELECTING THE DIGITAL INPUT)
Five digital inputs can be assigned for the desired source.
Use this menu to determine which source is connected to which input.
Example;
When the digital output of a DVD player is connected to Digital 4 (input
jack) of the SR7200;
1. Move the cursor on the line of the DVD with cursor buttons ^ or v.
2. Press the the cursor < or > button until “DIG4” is displayed.
3. Press the OK button to chose.
4. If you desire to continue the next setup, press the OK button on
NEXT-SETUP.
If you desire to exit from OSD menu system, press the OK button
on EXIT.
Notes:
The TUNER, VCR1, TAPE and AUX are assigned to the analog
input, and are prevented from selecting any digital input.
While the DTS-LD or DTS-CD is playing, this setup is not available,
this is to avoid noise being generated from the analog input. Stop
the LD or CD playback to setup.
The SR7200 does not switch from digital input to analog input or
vice versa automatically.
In the event that both digital and analog inputs are connected to
SR7200, if you desire to switch to an analog input temporarily, you
can switch by pressing the A/D button u.
SYSTEM SETUP 3/3 (DC CONTROL OUTPUT)
SR7200 has two DC control jacks, each one is selectable to link with
input functions for the main room or multi room.
You can select MAIN ROOM, MULTI ROOM or OFF for DC1 & DC2
independently by < or > button.
And then press OK button and move the cursor to select the linked
input function you desired by < or > button and press OK button to
chose.