Filter
Top Products
18
ENGLISH
PREFERENCE
1.
Select “PREFERENCE” in SETUP MAIN MENU with or
cursor button, and press the OK button.
2.
To select a desired content, press or cursor button.
TV AUTO: Select the TV AUTO ON/OFF function to enable or
disable with or cursor button.
(refer to page 21)
OSD INFO: Select the OSD information function to enable or disable
with or cursor button.
If you select “ENABLE”, SR5300 will display the status of
the feature (Volume up/down, input select, etc..) on the
TV monitor. But if you do not desire this information,
select “DISABLE “.
If you finish the setup in this item, move cursor to “MAIN” with or
cursor buttons and press OK button.
SURROUND
1.
Select “SURROUND” in SETUP MAIN MENU with or cursor
button, and press the OK button.
2.
To select a desired content , press or cursor button.
SURR-MODE : Select the desired surround mode with or cursor
button.
HT-EQ : Select to active the HT (Home Theater)-EQ with or
cursor button.
This mode compensates for the audio portion of a
movie sounding “bright”.
This equalizer is effective in Auto, DOLBY, DTS and
SEREO mode.
When this mode is activated, “HT-EQ” indicator lights
up.
LFE LEVEL : Select the output level of the LFE signal included in
the Dolby Digital signal or the DTS signal.
Select 0dB, -10 dB or OFF with or cursor button.
The level is ordinarily set to 0 dB except DTS-Music
mode. In the DTS-Music mode, default level is set to -
10 dB.
CENTER : Adjust the volume level of the center speaker
between -10 dB and +10 dB in 1 level interval with
or cursor button.
SURR. R : Adjust the volume level of the surround right speaker
between -10 dB and +10 dB in 1 level interval with
or cursor button.
SURR. C : Adjust the volume level of the surround center
speaker between -10 dB and +10 dB in 1 level
interval with or cursor button.
3PREFERENCE
TV-AUTO : DISABLE
OSD I NFO : ENABLE
MA I N EX I T
SURR. L : Adjust the volume level of the surround left speaker
between -10 dB and +10 dB in 1 level interval with
or cursor button.
SUB W : Adjust the volume level of the subwoofer speaker
between -10 dB and +10 dB in 1 level interval with
or cursor button.
If you finish the setup in this item, move cursor to “MAIN” with or
cursor buttons and press OK button.
Note:
• CENTER, SURR.R, SURR. C, SURR. L, and SUB W volume
level are synchronized with SETUP MAIN MENU 2-3 Speaker
Level.
PL2 (PRO LOGIC II) MUSIC PARAMETER
Pro Logic II-Music mode creates a rich and enveloping surround
ambience from stereo sources such as CDs.
In this
mode, SR5300 includes three controls to fine-tune the
soundfield as follow.
Select “PRO LOGIC 2” in SETUP MAIN MENU with or cursor
button, and press the OK button.
PARAMETER: Select “DEFAULT” or “CUSTOM” with or
cursor button
If you select “CUSTOM”, you can adjust three
parameters as follow
PANORAMA: Select the Panorama mode On or Off with or
cursor button.
Panorama wraps the sound of the front left and
right speakers around you for an exciting
perspective.
DIMENSION: Set the Dimension level between 0 and 6 level in 1
level interval with or cursor button.
Adjust the soundfield either towards the front or
towards the rear.
This can be useful to help achieve a more suitable
balance from all the speakers with certain
recordings.
CENTER WIDTH: Set the Center width level between 0 and 7 level in
1 level interval with or cursor button.
Center Width allows you to gradually spread the
center channel sound into the front left and right
speakers.
At its widest setting, all the sound from the center is
mixed into the left and right.
This control may help achieve a more spacious
sound or a better blend of the front image.
If “NONE” was selected for the Center speaker
setting in the Speaker size, then this setting will not
appear.
If you finish the setup in this menu, move cursor to “MAIN” with or
cursor buttons and press OK button.
5PL2-MUSICPARAMETER
PARAMETER : DEFAULT
PANORAMA : OFF
DIMENSION : 4
CENTER WIDTH : 0
MA I N EX I T
4 SURROUND
SURR. MODE : AUTO
HT-EQ : OFF
LFE LEVEL : 0 dB
CENTER : 0 dB
SURR. R : 0 dB
SURR. C : 0 dB
SURR. L : 0 dB
SUB W : 0 dB
MA I N EX I T