Filter
Top Products
ENGLISH
TAPE REWIND/FAST FORWARD
Regardless of the direction that the tape transport is
currently in, pressing the (Fast Forward) control
button will place the tape transport in the high speed
fast forward mode and the tape will advance quickly
from left to right. Pressing the
(Rewind) control
button will place the tape transport in the high speed
rewind mode and the tape will retract quickly from
right to left. In either the fast forward or the rewind
mode, the tape transport will continue to fast forward
or rewind until the stop control button is pressed or the
end of the tape is reached.
Note:
Automatic search operations cannot operate on the
Tape and CD at the same time.
- 13 -
TAPE RECORD
1. Open the cassette holder by pressing the EJECT
button. Load a recordable cassette tape into the
cassette holder and close. The
indicator on the
play control button will begin to flash. (If you
wish to change the tape direction, press the
play control button and then press the stop
control button).
2. Set the DOLBY NR switch to the position that you
want to record the tapes' noise reduction in (i.e.
tapes to be recorded with Dolby B noise reduction
need to have this switch in the Dolby B position,
tapes to be recorded with Dolby C noise reduction
need to have this switch in the Dolby C position,
and tapes to be recorded without Dolby Noise
Reduction need to have this control set to the Off
position). When recording FM broadcast with
Dolby Noise reduction on, set the MPX FILTER
switch (on the back of the unit) to the On position.
3. Set the REVERSE MODE switch to the desired
position.
4. Set the ALC control to the desired position, on or
off.
5. Press the REC/PAUSE button. The REC indicator
will begin to flash indicating the tape transport is in
the record pause mode.
6. If the ALC control is in the Off position, use the
MANUAL RECORD LEVEL control to adjust the
input signal to the desired recording level.
7. Press the FORWARD PLAY button to begin
recording in the forward direction. Press the
REVERSE PLAY button to begin recording in
the reverse direction. When the tape enters into
the playback mode the REC indicator and the play
control button indicator will change from the
flashing mode to the constant on mode. This
indicates the tape transport is in the record mode.
8. To pause the tape transport during recording,
press the REC/PAUSE button. Press the play
control button (
or )to resume recording.
9. Pressing the STOP button
will stop the tape
transport during recording. Pressing the
rewind button in the play/record direction or
the
fast forward button in the play/record
direction will cause the unit to return to the
position at which recording began.
CD PLAYER OPERATION
CD PLAYBACK
1. Open the compact disc tray by pressing the STOP/
EJECT button . Load a compact disc onto the
compact disc tray and close the tray by gently
pushing the front of the compact disc tray or by
pressing the STOP/EJECT button . The CD
player display will show the general data of the
current CD.
2. To begin playback of the compact disc, press the
PLAY/PAUSE button . The indicator in the
PLAY/PAUSE button will illuminate. The display
will show the data for the first track and the track
will begin to play.
3. To pause the CD during playback, press the PLAY/
PAUSE button . The display will remain in the
current position and the indicator in the PLAY/
PAUSE button will begin to flash. Pressing the
PLAY/PAUSE button will resume normal
playback from the point that the CD player was
paused.
4. Upon completion of playback of the last track in
the disc, the CD Player will return to the stop
mode. You can also stop the CD playback by
pressing the STOP/EJECT button once.
Pressing the STOP/EJECT button again will
cause the CD tray to open.