Filter
Top Products
8
ENGLISH
FRANCAIS
DEUTSCH
NEDERLANDS
ESPANOLITALINO PORTUGUES
SVENSKA
DANSK
DANSK
SVENSKAPORTUGUES ITALINOESPANOL NEDERLANDSDEUTSCH
FRANCAIS
ENGLISH
Changing the Time Display
Pressing the TIME button u cycles the time display through
the following modes:
Playing Time Display Example
Track Remaining Time
Track Elapsed Time
Disc Remaining Time
Playing a CD
Track Remaining Time
Track Elapsed Time
Disc Elapsed Time
Disc Remaining Time
Disc Total Time
Searching (Searching for a Desired Position
in a Track)
- While playing or in pause, press the button !8 to scan in
the forwards direction.
- While playing or in pause, press the button !6 to scan in the
reverse direction.
<During playback> Searching
For the first three seconds after the
button !6 or the
button !8 is held down, the CD player scans at slow speed
(about 2x normal playing speed).
For the next three seconds, the CD player scans at medium
speed (about 4x normal playing speed).
After that, the CD player scans at high speed (about 16x nor-
mal playing speed).
<During pause> Frame Searching
If the
button !6 or the button !8 is pressed once, the
play position moves one frame.
If the button !6 or the button !8 is held down, the search
speed changes through three stages after every three sec-
onds, until a maximum speed of 75 frames per second (about
1x normal playing speed) is reached.
Tip:
One frame contains data for about 1/75 of a second of play-
back.
Turning the PITCH/SEARCH dial @0 has the following effect
(PMD331/PMD340 only):
<When paused> Frame Searching
- Each time the PITCH/SEARCH dial @0 is turned clockwise,
the play position advances one frame.
- Each time the PITCH/SEARCH dial @0 is turned counterclockwise,
the play position reverses one frame.
- If the PITCH/SEARCH is turned quickly, the search speed
changes through three stages until a maximum of 75 frames
per second is reached.
Tip:
One frame contains data for about 1/75 of a second of play-
back.
Stopping Playback
Press the button !3.
Playing a CD Again from the First Track
Press the button !7.
Removing a Disc
Press the button y to open the disc tray w, and then remove
the disc. Press the button y again to close the disc tray w.
Note:
Always close the disc tray w when it is not in use.
Tips:
- There is an “Auto Close” feature for the disc tray w. In the
Preset menu, set one of the following for “Auto CLS: OFF”
(initial value), 10 seconds, 30 seconds, 60 seconds, or 180
seconds.
- If “Tray Lock:” is displayed and the tray does not open even if
the
button y is pressed while a track is playing or while
paused, the tray lock setting is set to “On” (initial value). The
setting can be cancelled by switching No.11 “Tray Lock:” on
the Preset menu to “Off:.”
Disc Elapsed Time
Disc Total Time