Filter
Top Products
15
ENGLISH
Clearing a program
Press
99
99
9
STOP
(17, 68) if necessary to stop programmed
play.
Press
99
99
9
STOP
(17, 68) again to clear the program.
➔ PROGRAM disappears from the display.
• The program is also cleared if you open the disc tray.
Erasing a track from a program
In Stop mode press
PROG
(72) on the remote control to
enter Program mode.
Use
QQ
QQ
Q (19, 62) or
RR
RR
R (18, 67) to select the track from
which to delete.
➔ The track number and program step will be shown on
the display.
Press
CANCEL/DELETE
(10, 66) to erase the track from
the program.
➔ The remaining program steps and the remaining playing
time of the program will be displayed.
PROGRAMMING
The numbers between parentheses refer to the fold-out.
Programmed play
• You can program up to 99 tracks to play in any desired se-
quence.
• Tracks can be programmed more than once, but each time
counts as a track. (step)
Programming for playback
Press
PROG
(72) on the remote control to enter Pro-
gram mode.
➔
PROGRAM flashes and appears on the display.
Select the required track numbers by turning the
EASY
JOG
(12) key left or right and store by pressing
PUSH EN-
TER
(12, 65).
or:
Key in a track number with the
NUMBER
(57). For 2-digit
numbers, press the keys in rapid succession.
➔ The track will be stored in the program.
➔ The track number, total program time and the number of
programmed tracks (steps) are displayed.
Repeat step for all tracks to be programmed.
Press
STOP
(17, 68) or
PROG
(72) on the remote control
to end programming.
➔ PROGRAM lights continuously.
Press
22
22
2/
;;
;;
;
PLAY/PAUSE
(16, 60) to start programmed play.