Filter
Top Products
ENGLISH
11
SYSTEM SETUP 2/2
6CH. DIRECT: 6 channel direct input of the AV9000
shares the front channel of the desired
source. Select the desired source with
or button. Press the OK button to
decide.
TV AUTO: This product is equipped with a TV-auto
ON/OFF system, which automatically turns
on or off the power 1 seconds to 5 minutes
after the TV video input signal has been
sent or has been stopped.
Switch the TV AUTO ON/OFF function to
enable (ON) or disable (OFF) with or
button. To use this function, connect the
TV video input to TV tuner’s video output.
ONSCREEN DISPLAY
BACKGROUND COLOR: The back color of the OSD system can be
selected from 6 colors. Select the color
number with or button. At this time,
the back color will be changed as
selected color number.
CHARACTER POSITION:The character displayed position can be
adjusted by +5 or -5 steps in each vertical
direction. Select the desired position with
or button. Press the OK button to
decide. All characters of the OSD menu
will be displayed in the selected position.
OSD MAIN MENU
1. Press the AMP button.
2. Press any one of the cursor buttons ( , , , and OK) to display
the “MAIN MENU” of the on-screen display menu.
The cursor can be moved up and down with cursor buttons and
.
When selecting the input source, press the OK button with the
display as shown the on the left.
SYSTEM SETUP
SYSTEM SETUP 1/2 (SELECTING THE DIGITAL INPUT)
Four digital inputs and RF input can be assigned for the desired
source. Use this menu to set the AV9000 as connecting equipment
and connecting method.
Example;
When the digital output of the DVD player is connected to Digital 4
(input jack) of the AV9000;
1. Move the cursor on the line of the DVD with cursor buttons and
.
2. Move the cursor on “Dig 4” with cursor buttons and .
3. Press the OK button to decide.
When the AC-3 RF output of the LD player is connected to the RF IN
(input jack) of the AV9000 and the digital output of the LD player is
connected to Digital 2 (input jack) of the AV9000, select the line of the
LD and set the “RF” and “Digital 2”.
Notes:
The TUNER and AUX are fixed to the analog input, and are
not allowed to select any digital input.
The RF input is available for LD or DVD, and can be linked
with Digital 1,2,3 or 4.
If RF input is linked with any Digital input, once the RF signal
is not supplied, AV9000 will switch from the RF input to the
digital input automatically.
In case you use an LD player, you should connect not only
RF output but also Digital output.
This is for a Laser Disc which is not encoded by Dolby Digital.
While the DTS-LD or DTS-CD is playing, this setup is not
available.
This is to avoid noise being generated from analog input.
Stop the LD or CD playback to setup.
AV9000 does not switch from digital input to analog input or
vice versa automatically.
In case both digital and analog input are connected to
AV9000, if you desire to switch to analog input temporarily,
you can switch by pressing the A/D key.
OSD MAIN MENU
SURROUND MODE
REC COPY
MULTI ROOM SELECT
STATION NAME INPUT
SYSTEM SETUP
SPKR SETUP / LEVELS
EXIT
Input RF Dig1234 Ana
CD
TAPE
CD-R/MD
TV
LD
DVD
VCR1
DSS/VCR2
TO OTHER SYSTEM SETUP
6CH. DIRECT : OFF
TV AUTO : DISABLE
BACK COLOR : COLOR-1
CHARACTER POSITION
: 0
RETURN TO MAIN/EXIT