Filter
Top Products
22
ENGLISH
77
77
7 Error Messages
When multiple PM-15S1s are connected by FCBS, the below
error messages may appear on the display. In these cases,
there is a problem with the ID number setting or remote cable
connection. Check the ID numbers and remote cable as
indicated in the below table. For details on how to set ID
numbers, see “How to Set ID” on pg. 19.
TROUBLESHOOTING
Error
message
Meaning
1
ERROR 02
ID 2 is used with
more than one amp.
2
ERROR 03
ID 3 is used with
more than one amp.
3
ERROR 04
ID 4 is used with
more than one amp.
4
ERROR 11
Amps of IDs 2 - 4
cannot communi-
cate with ID 1 amp.
5
ERROR 12
ID 1 amp cannot
communicate with
amps of IDs 2 - 4.
What to do
Set separate ID
numbers for each amp.
If power to ID 1 amp is
OFF, activate power.
Check remote cable is
properly connected.
If ID 1 is used for more
than one amp, properly
set ID numbers. Check
remote cable is properly
connected.
OTHERS
The section describes the care and maintenance tasks that
must be performed to optimize the operation of your Marantz
equipment.
77
77
7
Cleaning of equipment external surfaces
The exterior finish of your unit will last indefinitely with proper
care and cleaning, Never use scouring pads, steel wool,
scourging powders or harsh chemical agents (e.g., lye
solution), alcohol, thinner, benzine, insecticide or other volatile
substances as these wil mar the finish of the equipment.
Likewise, never use cloths containing chemical substances. If
the equipment get dirty, wipe the external surfaces with a soft,
lint-free cloth.
If the equipment becomes heavily soiled:
• dilute some washing up liquid in water, in a ratio of one
part detergent to six parts water.
• dip a soft, lint free in the solution and wring the it is damp.
• wipe the equipment with the damp cloth.
• dry the equipment by wiping it with a dry cloth.
77
77
7 Repairs
Only the most competent and qualified service technicians
should be allowed to service the factory-trained warranty station
personnel have the knowledge and special facilities needed
for repair and calibration of this precision equipment. After the
warranty period has expired, repairs will be performed for a
charge if the equipment can be returned to normal operation.
In the event of difficulty, refer to your dealer or write directly to
the nearest location to you that is listed on the Marantz
Authorized Service Station list. If writing, please include the
model and serial number of the equipment together with a full
description of what you think is abnormal about the equipment's
behaviour.