Filter
Top Products
3139 116 19292 (ENG)
21
RECORDING CLOCK
• Recording will start automatically.
5 Press STOP•OPEN on tape deck 1
and tape deck 2 to stop dubbing.
Notes:
– At the end of side A, flip the tapes to
side B and repeat the procedure.
– Dubbing of tapes is only possible from
tape deck 2 to tape deck 1.
– To ensure good dubbing, use tapes of
the same length.
Recording from other
sources (only on tape deck 1)
1 Load a blank tape into tape deck 1.
2 Press CD, TUNER or AUX.
• Start playback of the selected source.
3 Press RECORD on tape deck 1 to
start recording.
™ The REC starts flashing.
4 Press PAUSE to interrupt
recording.
5 Press STOP•OPEN on tape deck 1
to stop recording.
Note:
– During recording, it is not possible to
listen to another sound source.
View Clock
You can view the clock (if it is set) if the
system is in Standby mode or when any
sound source is selected (CD, TUNER,
etc.). The clock will be displayed for
about seven seconds.
• Press CLOCK•TIMER briefly (on
the system only).
™ “10:38 PM or 22:38” (the
current time) will be displayed
depending on whether you have
selected 12- or 24-hour mode.
™ “--:--” will be displayed if the
clock is not set.
Clock Setting
The clock can be set in either 12- or
24-hour mode, e.g. “12:00 AM“ or
“00:00“. Before setting the clock, you
must be in the View Clock mode.
1 Press CLOCK•TIMER to select
clock mode.
2 Press PROGRAM to select 12- and
24- hour mode.
™ If 12-hour mode is selected,
“12:00“ starts flashing and the
AM lights up.
™ If 24-hour mode is selected,
“00:00” starts flashing.
3 Set the hour with␣ à or á.
4 Set the minute with␣ í or ë.
5 Press CLOCK•TIMER again to
store the setting.
™ The clock starts.
DIGITAL
SOUND
CONTROL
DIGITAL SOUND CONTROL
STANDBY
-
ON
PROGRAM CLOCK•TIMER
DIM
FW-
C10
MINI HIFI SYSTEM
CD1 • 2 • 3 FM •AM
TAPE 1 • 2
TAPECD TUNER
AUX
PRESET
▲
▲
TUNING
▲
▲
▲
▲
STOP•CLEARSEARCH
PLAY• PAUSE PREV NEXT
D
B
B
VIDEO
O
P
T
I
M
A
L
J
A
Z
Z
R
O
C
K
T
E
C
H
N
O
DSC
MASTER
VOLUME
pg 01-28/C1-C10/37-En 16/11/1999, 1:57 PM21