6
CD Changer Control (Optional)
1. Load your CD changer with compact discs per
the manufacturer’s operating instructions.
2. Press the “MODE” (13) button until the display
reads “CDC” which indicates that the CD chang-
er is active (Figure L).
3. To change the active CD, press either the “DISC
DOWN” (7) or “DISC UP” (8) buttons to scroll
through your selection of CD’s in the CD chang-
er. If a CD is not in a tray in the changer, the
M9999 will continue to scroll through the trays
until one is found.
CD Operation
1. Insert a compact disc into the CD disc slot
(15). The disc will auto load and auto play (The
disc icon in the display will begin to rotate)
(Figure H).
Note: If the disc does not auto load, do not
force it. Press the “Eject” button (14) as you
may already have a disc inserted.
2. To change the music track, rotate the “Track”
knob (3) to the right or left (Figure I). Track
change indication will appear in the display
area (17).
3. To preview each song on the disc for 10 sec-
onds, press the “INTRO” button (6). “INT” will
appear in the display area. To turn off this fea-
ture, press the “INTRO” button again. The indi-
cator in the display will disappear (Figure J).
4. To repeat play of a single song on the CD, press
the “REPEAT” button (5) one time. The “RPT”
indicator will appear in the display area
(Figure K). Press the “REPEAT” button again to
stop the repeat function. The indicator in the
display (17) will disappear.
5. To “Pause” the playing of the disc, press the
“PLAY/PAUSE” button (4) once. To resume
play, press the “PLAY/PAUSE” button again.
6. To eject the disc, press the “Eject” button (14).
If the CD is not removed after three seconds it
will be reloaded into the unit.
Figure H
Figure I (Adjusting the Track)
INT
Figure J (Intro Display)
RPT
Figure K (Repeat Display)
Figure L (CD Changer Control Display)