Filter
Top Products
4
1. Radio Tuning Knob
Rotate the radio tuning knob in either direction to select the
desired AM or FM station.
2. Power On/Off Button
Press the Power button to turn the stereo“On” or “Off”.
3. AM/FM Band Button
Press the AM/FM selector button to choose the tuning band you
wish to listen to.
4. Fast Forward / Eject Button
With the tape playing, press this button in halfway until it locks,
to rapidly advance the position of the tape. To release, press the
button lightly and release it. Depressing the button all the way in
will stop the tape from playing and eject the tape from the
mechanism.
5. Tape Indicator Light
A green light will light when the unit is in the tape mode.
6. Volume Control Knob
Rotate this control clockwise. Rotating the control progressively
clockwise will increase the output volume level.
7. Balance Control Knob
Rotate the balance control from left to right to achieve the correct
speaker balance. This control will balance two speakers from left to
right. You will feel a “click” at the center point in the controls
rotation, this is the controls mechanical center.
8. Tone Control Knob
The tone control allows you to vary the overall tone of the music
you are listening to. Rotate the control counter clockwise to
make the tone lower (bass) and clockwise rotation will make the
tone higher (treble).
9. Dial Indicator
This designates the radio station on the dial scale.
Controls and Operation
M2080 English 08/04/00 7:51 AM Page 4