Filter
Top Products
FM
(Substitute the word TUNER for PX-600
front panel operation)
▲ To select the TUNER, momentarily press the
FM button. The FM LED will illuminate.
▲ Once the tuner is selected, you can cycle
through up to 9 tuner presets by repeatedly
pressing the FM button.
2
▲ Press-and-hold the FM button for about two
seconds or until the FM LED flashes to
access an optional, additional command for
the tuner (such as SEEK).
2
The number of presets depends on the tuner in your
system and the way your dealer has set it up.
CD
▲ To select the CD and issue a PLAY command,
momentarily press the CD button. The CD
LED will illuminate.
▲ The second and subsequent momentary
presses of the CD button will send the SKIP
TRACK command to the CD player.
▲ To skip to the next disc, press and hold the
CD button for about two seconds or until the
CD LED flashes.
High-capacity CD changer operation
If your CD player is a high capacity changer
(usually 100 or more discs), substitute this
outline of functions:
CD but
ton pressed first time:
This will select the CD changer and begin to play
GROUP 1 or PLAYLIST 1.
CD but
ton pressed second and subsequent times:
The PX-600 sends a SKIP TRACK command. The
CD changer advances to the next track on the cur-
rent CD or the next step in the group or playlist.
There are some variables depending on how your
particular CD changer works.
CD press-and-hold:
The PX-600 will advance to the next group or
playlist. You can cycle through up to six playlists
or groups.
SYSTEM
TAPE
▲ To select the TAPE and issue a PLAY com-
mand, momentarily press the TAPE button.
The TAPE LED will illuminate.
▲ To reverse the play direction of the tape,
momentarily press the TAPE button again.
Each subsequent press of the TAPE button will
toggle the play direction.
▲ Depending upon whether you have a single or
multiple cassette player, the tape button press-
and-hold function will operate differently:
Single Cassette Players
The press-and-hold function can be used for one of
many other functions on the cassette deck
depending on which IR function is programmed.
Some examples of functions that may be used
are: Automatic Music Search [AMS], Fast Forward,
Rewind, Stop, etc. Ask your dealer how your
system is set up.
Multiple Tape Player
If your tape player holds multiple tapes, the press-
and-hold function may be used to advance to the
next tape.
AUX
▲ Ask your dealer what source, if any, is
attached to the AUX input. If it is a second CD
player or a tape deck, chances are it will work
in the same way as the examples above.
▲ If it is some other IR controlled component,
your dealer will explain its operation from a
keypad or IR remote control.
VID
▲ To select the audio from your VIDEO source,
momentarily press the VID button.
▲ The RT-A remote control has the following but-
tons dedicated to controlling VIDEO functions:
PLAY, STOP, FAST FORWARD, REWIND,
CHANNEL s, CHANNEL t, PAUSE, TV/VCR.
These functions are custom programmed for
your specific needs by your dealer which may
or may not match the labeling on the remote.
Ask your dealer to explain the operation of
these buttons for your particular system.
OPERATION
7 4