Mackie SRM350 Home Theater System User Manual


  Open as PDF
of 6
 
SRM350
oF 6 PAGES
5
O F 6 P A G E S
Active Speaker System
Active Speaker System
SRM350
SPEAKER
SRM350
oF 6 PAGES
6
O F 6 P A G E S
LOUD Technologies continually engages in research related to product improvement. New material,
production methods, and design renements are introduced into existing products without notice as a
routine expression of that philosophy. For this reason, any current LOUD Technologies product may differ
in some respect from its published description, but will always equal or exceed the original design speci-
cations unless otherwise stated. ©1999-2004 LOUD Technologies Inc. All rights reserved. Mackie and
the “Running Man” gure are registered trademarks of LOUD Technologies Inc.
Part No. 0013221 Rev. A 09/04
www.mackie.com
16220 Wood-Red Road NE, Woodinville, WA 98072 USA
800.898.3211, fax 425.487.4337, sales@mackie.com
UK +44.1268.570.808, fax +44.1268.570.809, uk@mackie.com
Active 2-Way Sound
Reinforcement Speaker System
SRM350
oF 6 PAGES
1
O F 6 P A G E S
SRM350
SPEAKER
Features
Bi-amplication with 165 watts rms low-frequency
and 30 watts rms high-frequency power
121 dB peak SPL
Wide dispersion, studio-quality high-frequency
horn
Large format exponential/conical high-frequency
horn mouth
State-of-the-art precision 1.4-inch titanium
compression driver
10-inch high-efciency, light mass woofer
Single mic/line level control
Contour switch provides ideal low-to-medium
level music playback equalization
Complete electronic and component protection
circuitry
Electronic equalization and phase alignment
Professional trapezoidal enclosure design
Built-in pole mount cup on bottom
Tilts on its side for use as a stage monitor
Correctly weight-balanced with comfortable
side handle for easy carrying and set up
Applications
Live and playback applications
Small to medium sized portable PA systems
Corporate events
Houses of worship
SRM350
The Mackie SRM350 is a full-range, portable, active
loudspeaker system providing high-output, wide-disper-
sion, and low distortion performance in a compact, com-
posite molded enclosure. Two ampliers independently
power a high precision 10-inch professional woofer and
1.4-inch diaphragm titanium compression driver with a
1-inch
exit throat. A sophisticated electronic control sys-
tem provides phase correction, crossover, and ve modes
of thermal and active system protection.
The SRM350 is tted with a specially designed horn
assembly that combines both an exponential and conical
geometry. The result is super smooth, low-distortion linear
audio performance across the entire specied coverage
angle of 90 degrees.
Careful attention has been given to the ergonomic
features of the system. The center of gravity, handle loca-
tions, handle design, position of y-points, and ease of
use have been carefully thought out. There is also an
integrated pole mount on the bottom of the cabinet and a
weather-resistant steel grille. The asymmetrical trapezoi-
dal cabinet has been designed to provide an ideal oor
monitoring position.
The SRM350 features a number of unique controls
including a mic/line switch, level control, combination
XLR/TRS input jack for mic- and line-level inputs, XLR thru-
jack to daisy-chain the signal to another speaker, and a
contour switch for low-level or background-level sound
reinforcement applications.
The SRM350 cabinet is constructed of high pressure
injected polypropylene. The enclosure features ample
amounts of reinforcement ribbing and structural strength-
ening resulting in a strong, super-rigid design providing
ideal acoustical characteristics.
next