Filter
Top Products
4
Have your loudspeaker’s serial number
ready. You must have an RA number
before you can obtain service at the
factory or an authorized service center.
2. Keep this owner’s manual. We don’t
need it to repair the loudspeaker.
3. Pack the loudspeaker in its original
package, including protective wrap,
endcaps, and box. This is very impor-
tant. When you call for the RA number,
please let Tech Support know if you
need new packaging. Mackie is not
responsible for any damage that occurs
due to non-factory packaging.
4. Include a legible note stating your name,
shipping address (no P.O. boxes),
daytime phone number, RA number,
and a detailed description of the prob-
lem, including how we can duplicate it.
5. Write the RA number in
BIG PRINT
on top of the box.
6. Ship the loudspeaker to us. We suggest
insurance for all forms of cartage. Ship
to this address:
Mackie Designs
SERVICE DEPARTMENT
Building #11
One Main Street
Whitinsville, MA 01588
7. We’ll try to fix the loudspeaker within
three to five business days. Ask Tech
Support for the latest turnaround times
when you call for your RA number.
The product MUST be packaged in its
original packing box and have the RMA
number appear on the box. Once it is
repaired, we’l ship it back the same way
in which it was received. This para-
graph does not necessarily apply to
non-warranty service.
Horn Type Constant Directivity
Mouth Size 10.6˝ (269 mm) W x
10.6˝ (269 mm) H
Throat Size 1.0˝ (25 mm)
System Specifications
Frequency Range (–10 dB) 50 Hz–22 kHz
Frequency Response (–3 dB) 75 Hz–20 kHz
Horizontal Coverage (–6 dB) 75º averaged
1 kHz–10 kHz
Vertical Coverage (–6 dB) 65º averaged
1 kHz–10 kHz
Directivity Factor; DI (Q) 10.93 (12.38) averaged
2 kHz–10 kHz
Sensitivity (1W@1m) 100 dB
Rated Maximum SPL@1m 124 dB long term
127 dB peak
Crossover Point 1300 Hz
Nominal System Impedance 8 ohms
Power Handling 250 watts RMS
Safety Features
High Frequency: Monitoring and limiting of
continuous input power via MOSFET-based
electronic circuit
Low Frequency: Monitoring of amplifier signal
delivered to woofer via current breaker switch.
Overpowering of woofer opens circuit and
requires resetting by pressing the circuit
breaker button.
Physical Properties
Height 32.1˝ (817 mm)
Front Width 19.1˝ (484 mm)
Rear Width 13.9˝ (353 mm)
Depth 18.1˝ (460 mm)
Net Weight 75 lbs. (34 kg)
Connector Type 1/4˝ TS jack and Neutrik Speakon
Enclosure Geometry
Trapezoidal, 10º side angles, 18 mm
multi-layered plywood, top and bottom
high pressure resin injected “caps”
Handles One on top, one on bottom cap, two
three-piece handles on each side
Color Black, PVC coated finish
Grille Custom perforated oval steel grille with
anti-corrosive treatment
Disclaimer
Since we are always striving to make our
products better by incorporating new and improved
materials, components, and manufacturing methods,
we reserve the right to change these specifications at
any time without notice.
“Mackie” and the “Running Man” figure are
trademarks or registered trademarks of Mackie
Designs Inc.
All other brand names mentioned are trade-
marks or registered trademarks of their respective
holders, and are hereby acknowledged.
SPECIFICATIONS
Transducer Specifications
Low-Frequency Transducer
Diameter 15˝ (381 mm)
Voice Coil Diameter 2.5˝ (64 mm)
High-Frequency Driver and Horn
Diaphragm Diameter 1.75˝ (44 mm)
Voice Coil Diameter 1.75˝ (44 mm)
Diaphragm Material Titanium
Power Handling 30 watts RMS (long term)
©2003 Mackie Designs Inc.
All Rights Reserved.