Filter
Top Products
60
FEET
NO
T
E
You should now be able to walk freely from room to room enjoying full
stereo sound. If you notice interference (noisy signal or if the sound is
distorted or breaks up), adjust the frequency by pressing CH-SEL on the
top of the transmitter base and then select CH-SEL on the headset.
This should help you to obtain better reception with
the headphones.
You may have to try this adjustment several times to
obtain optimum performance, depending on the conditions. Please refer
to the following drawings A and B for best tuning:
A
Keep a distance of about 60 feet between the headphone and the
transmitter when adjusting the tuning knob for best stereo reception.
For protection of the transmitter and to save power, the transmitter
will cut off automatically after about one minute when the input
signal from an audio source is too weak for operation. If the signal
from the audio source returns at a sufficient level, the transmitter will
turn on again automatically.
5
B
Whenever you find interference, readjust the frequency of the
transmitter by pressing CH-SEL on the transmitter and the CH-SEL
on the headphone to lock in a new frequency .
60
FEET