Filter
Top Products
8
T
R
OU
B
L
E
S
HOO
T
ING YOU
R
S
Y
S
T
E
M
NO SOUND - Make sure the AC adapter is fully inserted into the AC
outlet and into the DC Power Jack input on the
transmitter.
- Make sure the headphone ON/OFF switch is in the
ON position Indicated by a red LED light.
- Headphone battery may be too weak. Charge battery.
Charge the new batteries for 8 hours prior to the first
use.
- Make sure the TV, stereo receiver or audio component
is ON and tuned to a channel with audio.
- Adjust the volume control on the headphone to
increase the volume.
- The connected audio/video equipment is not playing.
Turn on the equipment.
- The volume of the headphones is turned down.
Adjust the volume to an appropriate level.
NO SIGNAL - Make sure the power indicator on the base unit is on.
Change the CH-SEL button on the base and the CH-SEL
on the headset to a matching frequency band (when you
can hear audio)
- Headphone batteries may be too weak. Charge the
- The headphone is too far from transmitter (over 30
Meters). Move closer.
- The input level of the audio signal is too low. Turn up
the volume of the audio source equipment.
-
Make sure the power indicator on the headset is on.
included NiMh rechargable AAA batteries or replace
them with new ones.