Filter
Top Products
BH970 Wireless Mono DECT Headset
66 English
Setup
Step 1: Select your setup method
Step 2: Select and prepare the
Headset
The easiest way to connect and configure
the BH970 is to use the Interactive Setup
Wizard available online here: www.logitech.
com/support/BH970. The setup section of
this quick start guide is only needed if the
Interactive Setup Wizard is not used.
Attaching the headband
1. Align the headset and the headband
wearing-style attachment, as illustrated,
and press firmly together until they click
into place (snap-to-click).
2. Rotate the microphone boom arm for
left or right ear use.
3. Adjust the length of the headband to fit
snug against the head.
Attaching the earhook
1. Assemble the earhook wearing-style
attachment for left or right ear use.
If necessary, remove the earbud and
replace with another size for best fit.
2. Align the headset and the earhook
wearing-style attachment, as illustrated,
and press firmly together until they click
into place (snap-to-click).
3. Shape the earhook to fit snug around
the ear.
www.logitech.com/support/BH970
OR
OR