Filter
Top Products
4
Information
Setup Instructions Package Contents
Table of Contents
LA-326 Confi guration 2 Setup Instructions
Single Unit with Security Cover
1
2
Locate Parts
Locate parts A, B and F and bags E and G. The remaining parts and six of the screws in bag E will
not be used in this configuration
Remove Screws
Remove the four outer screws from the bottom of the unit you are rack mounting.
3
Install part A
Install part A to the left side of unit using two screws from bag E. Use the set of holes toward the back of
the bracket, making this part sit one inch from the front edge of the unit.
4
Install part B
Install part B to the right side of unit using two screws from bag E. Again, use the set of holes
toward the back of the bracket, making the unit recessed one inch from the front of the rack.
5
Pick Screws
Determine which set of screws in bag G you want to use to install the security cover. The
thumb screws allow easier access, while the Allen (hex head) screws offer more security.
Remove Film
Remove protective film from part F (security cover).
7
Install part F
Use the selected screws from bag G to install part F.
Mount
Mount in rack.
8
6