Filter
Top Products
8
Information
Setup Instructions Package Contents
Table of Contents
LA-326 Confi guration 4 Setup Instructions
Dual Units with Security Cover
1
2
Locate Parts
Locate parts A, C, D and F and bags E and G. The remaining parts will not be used in this
configuration.
Remove Screws
Remove the four outer screws from the bottom of both units you are rack mounting.
3
Pick Sides
Determine which unit will be on the right side of the rack (unit “1”).
4
Install part C
Install part C to the right side of unit “1” using two screws from bag E. Again, use the set of holes
toward the back of the bracket, making the unit recessed one inch from the front of the rack.
5
Install part A
Install part A to the left side of unit “2” using two screws from bag E. Again, use the set of holes
toward the back of the bracket, making this part sit one inch in front of the front edge of the
unit.
7
Remove Screw
Remove the screw that is near the remote antenna connection on the rear of unit “2”.
See figure B.
Install part D
Install part D to both units using six screws
from bag E.
8
Remove Screw
Remove the screw that is near input 1 connection on the rear of unit “1”.
6
figure B