Filter
Top Products
Replacing the fuse
To replace the fuse, first identify the correct fuse for your local
voltage. This should be:
• 3.15A anti-surge for 230V
• 6.3A anti-surge for 115V
• 6.3A anti-surge for 100V (Japanese version).
Pull open the fuse drawer at the bottom of the mains inlet, insert
the fuse in the rear compartment, and close the drawer.
Earthing the LK85/140
The earthed moulded mains lead supplied must always be used
with the LK85/140. Never use an unearthed plug or adaptor.
Positioning
You can position the LK85/140 almost anywhere you find
convenient, but the following considerations may be useful.
The LK85/140 is a powerful amplifier and can generate several
hundred Watts of heat under extreme use. In cases of overloading
or overheating the amplifier will automatically shut down. No
damage will result if it does so.
Always ensure there is plenty of air circulation around the amplifier,
especially if stacked with other Linn products or stored in a
cupboard. If your amplifier does shut down, try increasing the
ventilation around the unit and, if necessary, move it to a more
suitable location if it keeps shutting down.
6