Filter
Top Products
23
To clear a preset
St14
FM
P 14
FM
C 14
FM
TUNING
PRESET
PRESET
Enter store mode and select the preset, as if you were going to
store into it.
The display should show the number of the preset you want to
clear; for example St14.
Now press and hold the TUNING key on the front panel (TUN on
the Sneaky KUDOS) until the display shows, for example C 14. The
preset will then revert to the factory-stored default.
Displaying the signal strength
The KUDOS Tuner allows you to display the signal strength of any
station, to help you to choose the best frequency for a station, or
to enable you to set up an antenna for best reception.
The signal strength is displayed as a number between 0 and 99 in
dBµV. For good AM reception the signal strength should be
between 30 and 50dBµV. For good FM reception the signal
strength should be at least 70dBµV on strong stations.
To display the signal strength
98.7
FM
S 75
FM
TUNING
STEREO
STEREO
Press the TUNING key (TUN on the Sneaky KUDOS) until the
display shows the current signal strength. For example S 75.