Filter
Top Products
8 Change the unity gain for the source
The unity gain setting lets you use the KLIMAX KONTROL in a multi-channel AV system.
If you are setting up an AV processor as one of your sources and the front speakers are going to be
channelled through the KLIMAX KONTROL, set unity gain to Yes.In all other cases,set to No. If unity gain is
set to Yes for a source other than an AV processor,the volume level from your KLIMAX KONTROL will be very
high,non-adjustable and could damage your loudspeakers.
Press SOURCE – or BAL L again.
The display shows whether unity gain for the currently selected source
is on (Yes) or off (No).
To change the unity gain setting:
■ Press VOLUME +.
9 Exit source setup mode
To save your adjustments and exit source setup mode:
■ Press STANDBY.
Note:
If you wish to reset the KLIMAX KONTROL to the original settings
configured by the installer, enter user options mode and select YES
for the INSTALLER SETUP option (see User Options, page 15).
11
Source Setup