Filter
Top Products
9
Source Setup
4 Change the source type
Select the source type to match the name of the key on the handset you wish to use.You can select a source
type more than once if you have more than one device of the same type (e.g.two CD players) connected to
the KLIMAX KONTROL.
To display the next / previous source type:
■ PressVOLUME + / VOLUME -.
Possible source types for setups 1 to 4 are:CD,PH1, PH2,TUN,TAPE 1,
TAPE 2,AUX1,NONE.*
Possible source types for setup 5 are:KNEKT,NONE.*
5 Change the name for the source
You are able to give the source a name which will be shown on the
display when that source is selected.
Press SOURCE – on the front panel or BAL L on the handset.
The display shows the current name for the source with the first
character flashing.
To change the character:
■ Repeatedly press or hold VOLUME + / VOLUME - to cycle forwards/backwards
through the characters.
The following characters are available:A to Z,0 to 9,space.
To move to the next character:
■ Press MUTE.
Note:
The name can be up to eight characters long.
* For any source setups you are not using,select NONE.