Filter
Top Products
17AKURATE CD
ENGLISH
DVD commands
Scroll SACD
text
If set to ACCEPTED, DVD
commands such as Play, Pause,
Stop, Skip etc. that are relevant
to the AKURATE CD will be
accepted from the handset
whether the handset is in DVD or
CD mode.
If set to IGNORED, these
commands will only be accepted
if the handset is in CD mode.
See Handset (page 6) for further
detail.
ONCE: Track information on
SACDs will scroll once across the
front panel display.
LOOP: Track information on
SACDs will scroll repeatedly
across the front panel display.
OFF: Track information on SACDs
will not appear on the front panel
display.
AACCCCEEPPTTEEDD
IGNORED
OONNCCEE
LOOP
OFF
OOppttiioonn DDeessccrriippttiioonn SSeettttiinnggss
Channel Setup
(Analogue
outputs only)
Downmix
RS232
Baud rate
RS232 Events
RS232 Start
Message
If the AKURATE CD is being used
in a two channel (or stereo)
system, set to 2 CHANNEL.
(In such a system 5.1 channel
material on SACDs and
DVD-Audios will be downmixed
to 2 channels.)
If the AKURATE CD is being used
in a system that has more than
two channels, set to 5.1
CHANNEL.
If you are going to apply Dolby
Pro Logic decoding to the
analogue audio signal, set to
LtRt.
If you are not going to apply
Dolby Pro Logic decoding to the
audio signal, set to PURE
STEREO.
Sets the baudrate for RS232
control.
If set to ENABLED, passes
information regarding the internal
status of the unit to an external
device that accepts RS232 data.
If set to ENABLED, will output an
RS232 start message when the
unit is switched on.
22 CCHHAANNNNEELL
5.1 CHANNEL
PPUURREE SSTTEERREEOO
LtRt
99660000
4800 to 230400
(8 settings)
EENNAABBLLEEDD
DISABLED
EENNAABBLLEEDD
DISABLED
OOppttiioonn DDeessccrriippttiioonn SSeettttiinnggss
AKURATE cd english 15/5/07 08:42 Page 25