Filter
Top Products
8
Installation
REMOTE LEVEL/BASS EQ CONTROL
(Models X1.1000.1D & X1.2000.1D Only)
Mounting and installation
1. Find a location, either under the dash or near
the center console, that gives easy access to
the remote.
2. Using the screws supplied, install the mounting
clip with the tabs towards the back.
3. Route the cable for the remote and connect to
both the remote and amplifer.
4. Slip the remote onto the mounting clip until it
snaps into place.
Mounting
Clip
From Source Unit
From Source Unit
From Source Unit
From Source Unit From Source Unit
From Source Unit
X1.400.2
2-Channel
X1.800.4
4-Channel
2-Channel – Bridged
4-Channel –
Set as 3-Channel Bridged
X1.1000.1D
X1.2000.1D