Filter
Top Products
12
Presetting the
Presetting the
Radio
Radio
Stations
Stations
You can preset 50 stations for FM and AM.
Before tuning, make sure that you have turned
down the volume to the minimum.
1.
Press FUNC. on the front panel or FUNCTION
on the remote control to select the frequency
(AM or FM) you want.
2. Select a station you want by pressing
TUN. (-/+) buttons.
Tuning automatically
- Press TUN. (-/+) for more than 0.5 second.
Scanning stops when the unit tunes in a
station.
Tuning manually
-
Press
TUN. (-/+)
briefly and repeatedly.
3. Press PROGRAM/MEMO on the remote
control.
A preset number will flash in the display window.
4. Press PRESET ( ) on the remote con-
trol to select the preset number you want.
5.
Press PROGRAM/MEMO again.
The station is stored.
6.
Repeat steps 1 or 2 - 5 to store other
stations.
To delete all the memorized stations
Press and hold PROGRAM/MEMO on the
remote control for about two seconds, “CLEAR
ALL” appears in the display window and then
PROGRAM/MEMO on the remote control again,
the stations are deleted.
For your reference
If all stations have already been entered, “MEM
FULL” message will appear in the display win-
dow for a moment and then a preset number will
flash. To change the preset number, follow steps
4-5.
To recall presets
Press and hold PRESET ( ) on the remote
control until the desired preset number appears
or press it repeatedly.
Listening to the Radio
Listening to the Radio
1.
Press FUNC. on the front panel or FUNCTION
on the remote control to select the frequency
(AM or FM) you want.
The last received station is tuned in.
2. Press PRESET ( ) on the remote con-
trol repeatedly to select the preset station
you want.
- Each time you press the button, the unit
tunes in one preset station at a time.
3. Adjust the volume by rotating VOLUME
CONTROL KNOB (or pressing VOLUME
( ) on the remote control) repeatedly.
To listen to non-preset radio stations
• For manual tuning, see “Tuning manually” in
step 2 on left.
• For automatic tuning, see “Tuning automati-
cally” in step 2 on left.
To turn off the radio
Press POWER ( ) to turn the unit off or select
another function mode (CD/MP3, AUX, USB).
For your reference
•
If an FM program is noisy
Press MONO/ST. so that “STEREO” disap-
pears in the display window. There will be no
stereo effect, but the reception will improve.
Press MONO/ST. again to restore the stereo
effect.
•
To improve reception
Reposition the supplied antennas.
/
/
/
/