Filter
Top Products
23
Presetting the Radio Stations
You can preset 50 stations for FM and AM. Before
tuning, make sure that you have turned down the
volume to the minimum.
1.
Press TUNER/BAND to select the frequency (AM or
FM) you want.
2. Select a station you want by pressing
TUN. (-/+)
.
Tuning in automatically
-
P
ress TUN. (-/+) for more than 0.5 second.
Scanning stops when the unit tunes in a station.
Tuning in manually
-
P
ress
TUN. (-/+)
briefly and repeatedly.
3. Press PROG./MEMO..
A preset number will flash in the display window.
4. Press PRESET (v/V) to select the preset number
you want.
5. Press PROG./ MEMO. again.
The station is stored.
6. Repeat the steps 1 (or 2) to 5 to store other
stations.
To delete all the memorized stations
Press and hold PROG./ MEMO. for about two
seconds, “ERASE ALL” appears in the display window
and then PROG./ MEMO. again, the stations are
deleted.
For your reference
If all stations have already been entered, “FULL”
message will appear in the display window for a
moment and then a preset number will flash. To
change the preset number, follow steps 4-5.
To recall presets
Press and hold PRESET (v/V) until the desired preset
number appears or press it repeatedly.
Listening to the Radio
1.
Press TUNER/BAND to select the frequency (AM or
FM) you want.
The last received station is tuned in.
2. Press PRESET (v/V) repeatedly to select the
preset station you want.
- Each time you press the button, the unit tunes in
one preset station at a time.
3. Adjust the volume by pressing VOLUME (-/+)
repeatedly.
To listen to non-preset radio stations
• For manual tuning, see “Tuning in manually” in the
step 2 on left.
• For automatic tuning, see “Tuning in automatically”
in the step 2 on left.
To turn off the radio
Press
1
(POWER) to turn the unit off or select another
function mode (DVD/CD, USB, AUX, OSD iPod).
For your reference
•
If an FM program is noisy;
Press MO./ ST. that “MONO” appears in the display
window. There will be no stereo effect, but the
reception will be improved.
Press MO./ ST. again to restore the stereo effect.
•
To improve reception;
Reposition the supplied antennas.
Operation