Filter
Top Products
32
4. SPK DISTANCE (Setting speaker
distance)
You can set the distance of the speakers connected to
this unit.
Initial value is 3.0 meter (10 feet).
It lets you set the distance from your listening position
to the front, center, surround, surround center, and
subwoofer speakers. You can adjust from 0 meter to
15 meters (0 to 50 feet) in 0.3 meter (1 foot) steps.
If you press DISPLAY during setting the distance, the
unit of distance is changed from M (Meter) to Ft (Feet)
in the display window. If you press DISPLAY again, it
is changed from Ft (Feet) to M (Meter).
DELAY FL / DELAY FR
Set the distance of Front L/R speakers.
If both front speakers are not placed an equal
distance from your listening position, set the distance
to the closest speaker.
DELAY C
Sets the distance of Center speaker.
DELAY SR / DELAY SL
Sets the distance of Surround L/R speakers.
If both surround speakers are not placed an equal
distance from your listening position, set the distance
to the closest speaker.
DELAY CS
Sets the distance of Surround center speaker.
DELAY SW
Sets the distance of Subwoofer.
5. SPK LEVEL (Setting speaker level)
You can adjust the level of each speaker. These
setting are applied to all sound fields.
Initial value is 0dB.
You can adjust from -10dB to +10dB in 1dB step.
FL LEV: Sets the level of Front L speaker.
C LEV: Sets the level of Center speaker.
FR LEV: Sets the level of Front R speaker.
SR LEV: Sets the level of Surround R speaker.
SC LEV: Sets the level of Surround center speaker.
SL LEV: Sets the level of Surround L speaker.
SW LEV: Sets the level of Subwoofer.
6. HDMI OUT
HDMI (High Definition Multimedia Interface) supports
both video and audio on a single digital connection for
an easy all-digital output to an HDMI or DVI-equipped
TV. Set the HDMI OUT sound output to TV or SPK.
HDMI OUT
• TV : Outputs a sound signal of component with
HDMI jack to TV.
• SPK : Outputs a sound signal of component with
HDMI jack to speakers.
7. DIGITAL IN (Setting Digital Input
Signal)
This setting determines how to set the digital signals.
Digital
• AUTO : The unit changes to the selected digital
signal when received the digital signal.
The unit changes to analog signal
automatically when not received the digital
signal.
• MANUAL : The unit maintains the current mode
regardless of digital signal.
4 . SPK DISTANCE
DELAY FL : 0.0M ~ 15.0M
DELAY C : 0.0M ~ 15.0M
DELAY FR : 0.0M ~ 15.0M
DELAY SR : 0.0M ~ 15.0M
DELAY SC : 0.0M ~ 15.0M
DELAY SL : 0.0M ~ 15.0M
DELAY SW : 0.0M ~ 15.0M
5 . SPK LEVEL
FL LEV : -10dB ~ +10dB
C LEV : -10dB ~ +10dB
FR LEV : -10dB ~ +10dB
SR LEV : -10dB ~ +10dB
SC LEV : -10dB ~ +10dB
SL LEV : -10dB ~ +10dB
SW LEV : -10dB ~ +10dB
6 . HDMI OUT
HDMI OUT : TV / SPK
7 . DIGITAL IN
Digital : AUTO / MANUAL