Filter
Top Products
12
Storing Programs
When you want to save a program,
press Store. The Store LED will flash slowly
to indicate that the MPX 100 store function is
armed. (If you want to exit without saving the
current program, press Store again.)
Turn the PROGRAM knob to User, then
use VARIATION to select one of the 16 User
locations.
Press Store again to save your program
to the selected location (and overwrite the
program previously stored there). The Store
LED will flash rapidly while the store opera-
tion is completed. The store operation is
complete when the LED stops flashing and
turns off. The Edit LED will also turn off, as
the current program is now your saved ver-
sion.
Press Store.
The Store LED will
flash slowly.
Turn PROGRAM to User and use
VARIATION to select a User location.
Press Store again.
The Store LED will flash rapidly
while the store operation is
completed.